ZGG15-385Tr Modular Power Supply SPD

Product code :

The ZGG15-385Tr Modular Power Supply SPD is used for primary surge protection, and is composed of MOV power module for L/N-PE，L-N protection respectively. It is applied in low voltage AC power distribution system, and connected between the AC power supply and the equipment in parallel.

Price: Contact Us

Counseling support: +84-979933470

ZGG15-385Tr Modular Power Supply SPD

General
The ZGG15-385Tr Modular Power Supply SPD is used for primary surge protection, and is composed of MOV power module for L/N-PE，L-N protection respectively. It is applied in low voltage AC power distribution system, and connected between the AC power supply and the equipment in parallel. It can prevent the equipment from the impulse surge and the transient overvoltage caused by the outside environment (such as lightning, EMI, etc.) or by the system (such as switching effects of the system, startup or shutoff of the inductance and capacitance load, etc.).

Standards Complied

IEC 61643-1:2005 Surge protective devices connected to low-voltage distribution systems-Part 1: Performance requirements and testing methods
GB 18802.1-2011 Low-voltage surge protective devices- Part 1: Surge protective devices connected to low-voltage power distribution systems- Requirements and tests
YD/T 1235.1-2002 Technical requirements for surge protective devices connected to low-voltage distribution systems of telecommunication stations/sites
YD/T 1235.2-2002 Testing methods for surge protective devices connected to low-voltage distribution systems of telecommunication stations/sites

Technical Data

Protection mode	L-N、L/N-PE
Max. continuous operating voltage U_c	385 V
Nominal discharge current I_n(8/20μs)	30 kA
Impulse discharge current I_imp(10/350μs)	15 kA
Voltage protection level U_p	1.8 kV
Degree of protection (IP code)	IP 20
Installation system	TN、TT
Mounting on	DIN 35 mm rail